Colonial Metal Products, Inc.

Colonial Metal Products

All of our purchasing, processing, slitting, and shipping duties are performed at one convenient location: 2350 Quality Lane, Hermitage, Pennsylvania.


Colonial Metal Products - The Original Intercept Tin Plate Supplier

NSF-ISR Quality System Registered to ISO 9001:2000
Mailing Address:
P.O. Box 415 • Wheatland, PA 16161
Plant Location:
2350 Quality Lane • Hermitage, PA 16148
phone 724-346-5550 • fax 724-346-5559

Directions

Colonial Metal Products' Guarantee

We guarantee:

  • Only 100% prime steel is used. We process no end runs or mill seconds.
  • All of our tin plate meets or exceeds PPG/GED specifications.
  • 100% traceability of each coil we process from the mill to your shop floor.
  • Fast, friendly service, with experience, to help insure that your Intercept® machine will meet all of your expectations.
All of our purchasing, processing, slitting, and shipping duties are performed at one convenient location: 2350 Quality Lane, Hermitage, Pennsylvania.



Intercept® Strip Width Specifications
Standard Profile Spacers (.300" side wall height) Low Profile Spacers (.250" side wall height) Low-Low Profile Spacers (.210" side wall height)
Spacer Width (+/- .005") Strip Width (+.000/- .005") Spacer Width (+/- .005") Strip Width (+.000/- .005") Spacer Width (+/-.005") Strip Width (+.000/- .005")
7/32 0.862 7/32 0.762 7/32 0.682
1/4 0.893 1/4 0.793 1/4 0.713
9/32 0.924 9/32 0.824 9/32 0.744
5/16 0.956 5/16 0.856 5/16 0.776
11/32 0.986 11/32 0.886 11/32 0.806
3/8 1.018 3/8 0.918 3/8 0.838
13/32 1.049 13/32 0.949 13/32 0.869
7/16 1.081 7/16 0.981 7/16 0.901
15/32 1.111 15/32 1.011 15/32 0.931
1/2 1.143 1/2 1.043 1/2 0.963
17/32 1.173 17/32 1.073 17/32 0.993
9/16 1.205 9/16 1.105 9/16 1.025
19/32 1.237 19/32 1.137 19/32 1.058
5/8 1.268 5/8 1.168 5/8 1.088
21/32 1.3 21/32 1.200 21/32 1.119
11/16 1.331 11/16 1.231 11/16 1.151
23/32 1.363 23/32 1.263 23/32 1.183
3/4 1.393 3/4 1.292 3/4 1.213
25/32 1.425 25/32 1.325 25/32 1.245
13/16 1.455 13/16 1.356 13/16 1.276
27/32 1.487 27/32 1.387 27/32 1.307
7/8 1.518 7/8 1.418 7/8 1.338


Intercept® Coil Specifications
Coil (I.D.)16"
Coil O.D.36" maximum
Coil Weight320# (approximate)
Linear feet/coil6900' (approximate)
Cut Slit Width Tolerance+.000", -.005"
Coils Skidded3,000# maximum
Custom Packaging Available


Material Handling and Storage
  1. Upon Arrival, it is important to inspect all incoming pallets for damage that may have inccured in transit (tears, forklift damage, broken pallets, etc.)
  2. Keep the coils wrapped in the rust resistant plastic bag to protect the material from moisture and prevent rust during shipment and storage.
  3. Keep the material in a clean, dry area at a constant temperature.
  4. Keep the material away from moisture.
  5. Rewrap any unused material in the rust resistant bags.


Formula to Convert Linear Feet to Pounds

Multiplier is .0361
Pounds per Linear Foot is equal to slit width X .0361
Total Weight is equal to Pounds per Linear Foot X Linear Feet Needed

For example: You need 150,000 Linear Feet of 1/2" rectangular spacer per month. (Slit width for 1/2" spacer is 1.143")
1.143" X .0361 = .04126 pounds per foot
.04126 X 150,0000 = 6,189.35 pounds of tin plate
Therefore, you would order 6,190 pounds of tin plate coils slit to 1.143"

Linear Feet to Pounds Calculator

©2008 - Colonial Metal Products, Inc. - Contact